Restore And Recovery - HP Z238 User Manual

Restore and recovery

There are several options for recovering your system. Choose the method that best matches your situation
and level of expertise:
IMPORTANT:
Windows offers several options for restoring from backup, refreshing the workstation, and resetting the
●
workstation to its original state. For more information see Help and Support.
Type help in the taskbar search box, and then select Help and Support.
▲
If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers and/ or
●
applications option (select products only) of HP Recovery Manager to reinstall the individual application
or driver.
Type recovery in the taskbar search box, select HP Recovery Manager, select Reinstall drivers
▲
and/or applications, and then follow the on-screen instructions.
If you want to recover the Windows partition to original factory content, you can choose the System
●
Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media.
For more information, see
created recovery media, see
On select products, if you want to recover the workstation's original factory partition and content, or if
●
you have replaced the hard disk drive, you can use the Factory Reset option of HP Recovery media. For
more information, see
On select products, if you want to remove the recovery partition to reclaim hard disk drive space, HP
●
Recovery Manager offers the Remove Recovery Partition option.
For more information, see
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the workstation to its original factory state by using the
HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery
partition (select products only). If you have not already created recovery media, see
media (select products only) on page
What you need to know before you get started
HP Recovery Manager recovers only software that was installed at the factory. For software not
●
provided with this workstation, you must either download the software from the manufacturer's
website or reinstall the software from the media provided by the manufacturer.
IMPORTANT:
workstation issues.
HP Recovery media must be used if the workstation hard disk drive fails. If you have not already created
●
recovery media, see
To use the Factory Reset option (select products only), you must use HP Recovery media. If you have not
●
already created recovery media, see
If your workstation does not allow the creation of HP Recovery media or if the HP Recovery media does
●
not work, you can obtain recovery media for your system from support. See the Worldwide Telephone
Numbers booklet included with the workstation. You can also find contact information from the HP
website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen
instructions.
22 Chapter 4 Setting up, backing up, restoring, and recovering Windows 10
Not all methods are available on all products.
Recovering using HP Recovery Manager on page
Creating HP Recovery media (select products only) on page
Recovering using HP Recovery Manager on page
Removing the HP Recovery partition (select products only) on page
20.
Recovery through HP Recovery Manager should be used as a final attempt to correct
Creating HP Recovery media (select products only) on page
Creating HP Recovery media (select products only) on page
22. If you have not already
20.
22.
24.
Creating HP Recovery
20.
20.