Service Mode; Check Item - Sony RDR-HX520 Service Manual

QQ
3 7 63 1515 0
This is the diagnostics to locate cause of fault.
The diagnostics can be executed using the remote commander and a monitor.
To enter the service mode, connect the VIDEO OUT connector of the main unit to the monitor. While pressing the "A" (Open/Close) button
and the "G" (PLAY) button at the same time, connect the AC power cord to the power outlet. (Keep pressing the above buttons until a
message, "WELCOME" appears on the display panel of the main unit.)
While the diagnostics is in progress, either "OK" or "NG" appears on the monitor screen to enable the judgment whether the respective
devices or the peripheral are normal or have any abnormality.
When an abnormality is detected, the diagnostics is stopped at that moment and you can select to keep running the diagnostics or to stop it.

6-1. Check Item

Checking item
EEPROM
VIDEO DEC
DDR
DDR
All parts are mounted on the RD-060 board.
For IC301, only AEP3 is used.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
IC name
IC M24C32-WMN6T
IC TVP5147M1PFP
IC K4H511638C-UCB3T
IC K4H511638C-UCB3T
x ao
y
i
http://www.xiaoyu163.com
SECTION 6

SERVICE MODE

8
When NG is displayed as the result of the DEVICE TEST, the IC or
REF
its peripheral is defective.
IC102
IC301
IC105
IC106
Q Q
3 6 7 1 3
u163
.
6-1
RDR-HX520/HX525/HX720/HX722/
HX725/HX727/HX920/HX925
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9