Hdd Check Mode - Sony RDR-HX950 Service Manual

RDR-GX350/HX750/HX950
2. Aging for the HDD
Caution: Take caution as the all recorded data of HDD is deleted.
1) Press the "HDD" key to switch to HDD.
2) Press "ESC" on the service remote controller.
3) Press "REP.B" on the service remote controller.
4) Press "PLAY" to the Aging mode.
During Aging mode, the following operations are repeated in the order shown below.
1 Erasure of all the memory data from the HDD
2 Recording for 60 minutes
3 Playback for 60 minutes
[Tips]
During Aging, the number of loops is indicated on the FL display, as shown below.
[AGING 0001]
If an error is generated, the aging operation stops.
Note: Indications on the FL display are retained, and this information is also retained as an OSD.
5) Press the "ESC" key on the remote control unit for servicing to quit Aging mode and return to Normal mode.
Note: • If during recording: Recording is stopped.
• If during playback: Playback is paused.
• If during erasure of all memory data from the HDD, the unit stops after all memory data have been erased.

6-2-15. HDD Check Mode

1) Turn of the main power ON.
2) On the screen after exiting all menu screens, press "ESC" on the service remote controller.
3) Press "CX".
4) Press "0".
5) Press "1".
HDD CHECK MODE
1 HDD Information [----]
2 S.M.A.R.T. Attribute Information
3 S.M.A.R.T. DST
4 HDD R/W Check
###HDD[INT] is selected
6) Press "ESC". (Returns to the original screen)
All manuals and user guides at all-guides.com
###change[SCAN FWD]
* Used to check if the HDD has an error or not.
* Press the number of the item you want to check.
6-22