Stamina Wirk Ride 85-2449A Owner's Manual page 17

OPERATIONAL INSTRUCTIONS
DESKTOP ANGLE ADJUSTMENT
Refer to the illustrations below. The angle of the DESKTOP(21) can be set to different angles from Position
1 to Position 5. Lift the LEVER(55) up using your right foot, adjust the UPRIGHT(3)/DESKTOP(21) to
desired position. Then press the LEVER(55) down to lock the UPRIGHT(3)/DESKTOP(21) in position.
3
4 2
5
1
Position
Position Index
( Shown 1 to 5 )
TM
The Wirk Ride Workstation can be used while sitting or standing. Refer to the illustrations below.
TM
Please always set the DESKTOP(21) at Position 1 for mounting or dismounting the Wirk Ride
Workstation. For sitting, you can adjust the DESKTOP(21) to other angles with the LEVER(55) after you
are sitting on the bike. For using the DESKTOP(21) while standing, please keep the desktop in Position 1.
NEVER USE THE PEDALS WHILE STANDING.
1
Position
17