Sound Adjustment; Adjusting The Sound - Sony DHC-NXM4D Operating Instructions Manual

To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• When you press z START in step 5, the surround
effect may automatically change (see "Selecting the
surround effect" on page 45).
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
• If TAPE B is selected in step 4, silence is recorded.
44 GB

Sound Adjustment

Adjusting the sound

Generating a more dynamic
sound (Dynamic Sound
Generator X-tra)
Press DSGX on the unit.
Each time you press the button, the display
changes as follows:
DSGX ON y DSGX OFF
Adjusting the bass and treble
You can adjust the bass and treble to enjoy more
powerful sound.
Use buttons on the unit for the operation.
1
Turn SOUND MODE control to select
"BASS LEVEL" or "TREBLE LEVEL".
Each time you turn the control, the display
changes as follows:
SOUND FIELD y BASS LEVEL y
TREBLE LEVEL
2
Turn SOUND SELECT control to adjust
the level.
To exit the bass and treble
settings
If you do not perform any operations for
4 seconds, the display automatically returns to
the original display.