Timer Recording Radio Programs; Rec Timer - Sony DHC-NXM4D Operating Instructions Manual

9
Press ?/1 to turn off the system.
Other operations
To Do this
1
Check the setting Press CLOCK/TIMER
SELECT.
2
Press
until "PLAY SELECT?"
appears, then press ENTER.
Change the setting Start over from step 1.
1
Cancel the timer Press CLOCK/TIMER
SELECT.
2
Press
until "TIMER OFF?"
appears, then press ENTER.
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The system turns on 15 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on 15 seconds before the preset time,
the Play Timer will not be activated.
• You cannot use the optional component connected to
VIDEO/SAT IN L/R jacks as the sound source for
Play Timer.
M m
or repeatedly
M m
or repeatedly
Timer recording radio
programs

— Rec Timer

You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see "Presetting radio stations" on
page 38) and set the clock (see "Setting the
clock" on page 12).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
"Listening to a preset station" on
page 39).
2
Press CLOCK/TIMER SET.
"PLAY SET?" appears.
3
Press M or m repeatedly to select "REC
SET?", then press ENTER.
"ON" appears and the hour indication
flashes.
4
Set the time to start recording.
Press M or m repeatedly to set the hour, then
press ,.
The minute indication flashes.
Press M or m repeatedly to set the minute,
then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer ("REC TIMER"), the start
time, the stop time, and the preset radio
station to be recorded (e.g., "TUNER FM
5") appear in turn, before the original
display returns.
6
Load a recordable tape into deck B.
7
Press ?/1 to turn off the system.
continued
GB
49