Installing Intrusion Switch; Power Switch; Removing Power Switch - Dell OptiPlex 7050 Tower Owner's Manual

Installing intrusion switch

1 Insert the intrusion switch into the slot on the computer.
2 Route the intrusion switch cable through the fan grommet.
3 Connect the intrusion switch cable to the connector on the system board.
4 Close the front panel door.
5 Install the:
a bezel
b cover
6 Follow the procedure in

Power switch

Removing power switch

1 Follow the procedure in
2 Remove the:
30 Removing and installing components
After working inside your computer.
Before working inside your computer.