Installing SD card reader
1
Insert the SD card reader into the slot on the front panel door.
2
Tighten the screw to secure the SD card reader to the front panel door.
3
Connect the SD card reader cable to the connector on the system board.
4
Close the front panel door.
5
Install the:
a
bezel
b
cover
6
Follow the procedure in
Memory module
Removing memory module
1
Follow the procedure in
2
Remove the:
a
cover
b
bezel
3
Open the
front panel
door.
4
To remove the memory module:
a
Push the memory module retention tabs on both sides of the memory module.
b Lift the memory module from the memory module connector on the system board.
Installing memory module
1
Align the notch on the memory module with the tab on the memory module connector.
2
Insert the memory module into the memory module socket.
3
Press the memory module until the memory module retention tabs click into place.
4
Close the front panel door.
5
Install the:
a
cover
b
bezel
6
Follow the procedure in
After working inside your
computer.
Before working inside your
After working inside your
computer.
computer.
Removing and installing components
23