Incoming Signaling Validation - Polycom SoundPoint IP 300 Administrator's Manual

Administrator Guide - SoundPoint
user password is requested, the administrator password will also work. The web
server is protected by the administrator password.
Central
(boot
server)
Local

3.8.2 Incoming Signaling Validation

Three optional levels of security are provided for validating incoming network signal-
ing:
• source IP address validation
• digest authentication
• both
Central
(boot
server)
Local
® ®
IP / SoundStation IP
Configuration file: Specify the minimum lengths for the user and administrator
ipmid.cfg passwords.
•
Web Server None.
(if enabled)
Local Phone User The user and administrator passwords can be changed under
Interface the Settings menu. Passwords can consist of ASCII charac-
ters 32-127 (0x20-0x7F) only.
Changes are saved to local flash but are not backed up to
<Ethernet address>-phone.cfg on the boot server for secu-
rity reasons.
Configuration File: Specify the type of validation to perform on a request-by-
sip.cfg request basis, appropriate to specific event types in some
cases.
•
Web Server (if None.
enabled)
Local Phone User None.
Interface
Copyright © 2004 Polycom, Inc.
For more information, see 4.6.1.17.1 Password Lengths
<pwd/><length> on page 106.
For more information, see 4.6.2.1.3.3 Request Valida-
tion <requestValidation/> on page 117.
Features
55