Multiple Registrations - Polycom SoundPoint IP 300 Administrator's Manual

Administrator Guide - SoundPoint
waiting signal from a voicemail server will trigger the message-waiting indicator to
flash.
Central
(boot
server)
Local

3.6.2 Multiple Registrations

SoundPoint
tion ®
registrations, the IP 500 supports three and the IP 600 supports six. Each registration
is mapped to the familiar concept of a phone line. The user can select which line to
50
®
IP / SoundStation
Configuration file:
ipmid.cfg
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
®
IP phones support multiple registrations per phone and the SoundSta-
IP 4000 supports a single registration. The SoundPoint
Copyright © 2004 Polycom, Inc.
®
IP
For one-touch voicemail access, enable the "one-touch
voicemail" user preference.
• For more information, see 4.6.1.2 User Preferences
<user_preferences/> on page 69.
For one-touch voicemail access, choose to bypass instant
messages to remove the step of selecting between instant
messages and voicemail after pressing the Messages key on
the IP 500 and IP 600 (instant messages are still accessible
from the Main Menu).
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact), and the contact to call when the
user accesses voicemail.
• For more information, see 4.6.3.5 Messaging <msg/>
on page 128.
For one-touch voicemail access, enable the "one-touch
voicemail" user preference and choose to bypass instant
messages to remove the step of selecting between instant
messages and voicemail after pressing the Messages key on
the IP 500 and IP 600 (instant messages are still accessible
from the Main Menu).
Navigate to: http://<phoneIPAddress>/coreConf.htm
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact) to call when the user accesses
voicemail.
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. These changes will
permanently override global settings unless deleted via the
Reset User Settings menu selection.
None.
Features
® IP 300 supports two