White Pressure Roller And Cis Unit - Brother FAX218 Service Manual

1.7

White Pressure Roller and CIS Unit

(1) Turn the bushing of the white pressure roller clockwise approx. 90û and pull it out to the
right.
(2) Lift up the left end of the white pressure roller and push it to the right.
White pressure roller
(3) Unhook the two springs, using the spring hook.
(4) Slightly lift up the CIS unit and disconnect the CIS harness. The CIS support also
comes off.
CIS holder
Reassembling Notes
Before putting the white pressure roller back into place, wipe it with an alcohol-dampened
cloth.
When replacing the CIS unit, remove the CIS holders (secured with screws) from the old
CIS unit and install them to a new CIS unit.
CIS unit
CIS harness
IV - 17
Bushing
(Front)
CIS unit
Spring
CIS
support
Bushing
Scanner frame ASSY