Table of Contents
Advertisement
The TWAIN interface, DI Capture and DocAction software are automatically
installed to your system along with the scanner driver.
Attention
S
c
a
n
n
i
n
g
v
i
a
T
S
c
a
n
n
i
n
g
v
i
a
T
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use our bundled image-editing application
(NewSoft Presto! ImageFolio) and OCR software (I.R.I.S. Readiris Pro 10 Corporate
Edition) to scan via the TWAIN interface. When you get familiar with the scanning, you
may alternatively use other TWAIN compatible scanning programs or image-editing
applications to do your scanning projects.
Scan within NewSoft Presto! ImageFolio:
1. Click the Windows Start button to launch Presto! ImageFolio.
Attention
2. Within Presto! ImageFolio, click File > Acquire > Acquire.
3. In the TWAIN window that opens, select Flatbed Reflective as the Scan Type.
Before you start scanning, check the following:
Your scanner has been unlocked and the power
of both your computer and scanner is turned on.
The icon
tray.
Paper is appropriately placed on the scanner
flatbed glass.
W
A
I
N
I
n
t
e
r
f
a
c
W
A
I
N
I
n
t
e
r
f
a
c
If you have more than one scanner or other imaging
devices installed on your computer, you need to set
this scanner as the default scanning source before
you acquire the TWAIN program.
1. From the File menu of Presto! ImageFolio, click
Select Source.
2. In the window that opens, choose this scanner
and then click the OK button to set this scanner
as the default scanning source.
appears on the Windows system
e
e
15
Advertisement
Table of Contents
