Table of Contents
Advertisement
Attention
Scanning via TWAIN Interface
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use your TWAIN compatible program to scan
via the TWAIN interface. When you get familiar with the scanning, you may
alternatively use other TWAIN compatible scanning program or image-editing
application to do your scanning projects.
Select the Scan Source:
If you have more than one scanner or other imaging devices installed on your
computer, you need to set this scanner as the default scanning source before you
acquire TWAIN program. Please refer to your TWAIN compatible program manual for
more information about the settings.
Scan within your TWAIN compatible program:
1. Launch your TWAIN compatible program.
2. Open the TWAIN window within your TWAIN compatible program. Please refer
to your TWAIN compatible program manual for detailed information.
3. In the TWAIN window that opens, select ADF (Front Side) as the Scan Type if
you want to scan single-sided documents, or select ADF (Duplex) to scan
double-sided documents.
Before you start scanning, check the following:
The power of both your computer and scanner
is turned on.
The icon
system tray.
Paper is appropriately loaded into the ADF.
19
appears on the Windows
Advertisement
Table of Contents
