Table of Contents
Advertisement
4. Adjust the scanning settings.
5. Click the Preview button. The scanned image should appear in the Preview
Window. To define the margins and crop out sections of the image you don't
want scanned, use the mouse to click and drag the corners or sides of the scan
area borders. Adjust the scan settings again if the preview image is not to your
liking.
6. Click the Scan button.
7. When the scan finishes, click the Exit button to close the TWAIN window. The
scanned images are displayed in Presto! ImageFolio, and you may perform the
image editing tasks.
Scan within I.R.I.S. Readiris Pro 10 Corporate Edition:
1. Click the Windows Start button to launch Readiris Pro 10 Corporate Edition.
Attention
If you have more than one scanner or other imaging
devices installed on your computer, you need to set
this scanner as the default scanning source before
you acquire the TWAIN program.
1. In Readiris Pro 10 Corporate Edition, click the
Scanner button located on the left side.
2. Click Scanner Model. In the Type window that
opens, select Show TWAIN User Interface and
then click the OK button.
3. In the next window that pops up, click the
Configure button.
4. In the Select Source window that opens, choose
this scanner and then click the Select button to
16
Advertisement
Table of Contents
