Scanning Documents; Scanning Via Twain Interface - Plustek SmartOffice PL4080 User Manual

S D
CANNING
There are 4 different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within
any TWAIN-compliant application programs.
2. By scanning from the buttons on the scanner front panel.
3. By scanning from DocAction's Execute menu on the screen.
4. By scanning from the icon in the left side of the DocAction window.
The TWAIN interface and DocAction software is automatically installed to your
system along with the scanner driver.
Attention
S c a n n i n g v i a T
S c a n n i n g v i a T
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use your TWAIN compatible program to
scan via the TWAIN interface. When you get familiar with the scanning, you may
alternatively use other TWAIN compatible scanning program or image-editing
application to do your scanning projects.
Select the Scan Source:
If you have more than one scanner or other imaging devices installed on your
computer, you need to set this scanner as the default scanning source before you
acquire TWAIN program. Please refer to your TWAIN compatible program manual for
more information about the settings.
OCUMENTS
Before you start scanning, check the following:
The power of both your computer and
scanner is turned on.
The icon
system tray.
Paper is appropriately placed on the
scanner flatbed glass or loaded into the
ADF.
Close the ADF cover by pushing it back
down until it snaps back into place. The
scanner can not scan properly when the
ADF cover is not closed.
W A I N I n t e r f a c
W A I N I n t e r f a
appears on the Windows
e
c e
20