Section 5. Maintenance and Troubleshooting
7. Turn the drive right side up and locate the catch at the center of the
top of the drive.
Figure 33: Also locate the catch at the top front of the drive.
8. With the drive right side up, release the two side bezel hooks. To
release the hooks, press inward using the angled portion of the eject
tool. Do this only for the two bezel hooks on the sides. (You don't
have to do this for the hooks on the bottom.)
Figure 34: Press in with the angled portion of the eject tool to
60
PX-760 Installation and Users Manual
release the two side bezel hooks