What The Self-Test Results Indicate - Plextor PX-708UF Installation And User Manual

8. Turn the PX-708UF power switch to OFF, and set the self-test
switch to the right (OFF) position.
9. Turn the PX-708UF's power switch to ON (so the "1" is depressed).
10. Reconnect the USB or FireWire cable from your PX-708UF drive to
the computer.

What the Self-Test Results Indicate

• If a drive passes the self-test, then the drive's operation is OK.
• If the drive fails the self-test, in some cases the problem may be
caused by the media. Try the self-test again using a different brand
of DVD±R or CD-R media; if the drive passes the self-test this time,
the drive is OK.
Section 4. Maintenance and Troubleshooting
PX-708UF Installation and Users Manual
41