Emergency Eject
If the automatic eject button at the front of the drive does not work, use
this procedure to open the drive.
To use the emergency eject hole to open the drive:
1. Make sure power to the drive is OFF. (That is, turn off your
computer.)
2. At the front of the drive, insert the emergency eject tool, or a paper
clip or other thin, rigid object, into the emergency eject hole.
3. Push the tool or other object straight in, until the disc tray clicks
open.
4. Carefully continue to slide the disc tray open.
5. Remove the DVD or CD from the disc tray.
6. Carefully push the disc tray shut.
Using the Self-Test Diagnostics
The PX-708UF contains a set of self-test diagnostics that can help
isolate trouble and determine if a problem is in the drive or elsewhere.
What You'll Need
To perform the tests you'll need a blank piece of Plextor-recommended
DVD+R, DVD-R, or CD-R media. (See "Recommended Media" on
page 47, or visit our web site.) The self-test will write to this media, so
you won't be able to use this disc again.
Section 4. Maintenance and Troubleshooting
PX-708UF Installation and Users Manual
39