Table of Contents
Advertisement
MN006727A01-AF
Chapter 4 : Status Indicators
Gauge
Top Display:
Top Display:
4.1.2
HAZLOC Battery Type Detection
This feature alerts you when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.
During power-up, the following scenarios occur if there is a mismatch:
•
The radio continuously displays Wrong Battery with red intelligent backlight.
•
The radio Voice Announcement announces the programmed Wrong Battery.
•
The battery icon blinks continuously.
•
A repetitive tone sounds.
•
The red LED blinks continuously.
NOTE:
The radio alerts you when NNTN8921 and NNTN8930 batteries are attached to the radio
as these batteries are not supported. The radio requires a HAZLOC-certified and compatible
battery by default.
The radio does not display any indication when the radio is connected to the charger or when
the radio and battery is UL certified. Refer to the radio UL Manual for a list of battery, which is
UL certified with the radio.
Check with your dealer or system administrator for more information.
4.2
LED Indications
The LED indications represent the operational status of your radio. A qualified technician can
permanently disable the LED indication by programming it.
Table 1: LED Indications
Indication
Solid red
Blinking red
Double blinking red
22
Battery Charge
11% to 25%
10% or less (The gauge begins blinking at 10%)
Status
Radio is transmitting.
Radio is transmitting at low battery condition or detects an incompatible
battery.
Radio is transmitting an emergency alarm or call.
1
Advertisement
Table of Contents
