Table of Contents
Advertisement
Query
Target Location
7.1.1
Using ViQi Virtual Partner
Prerequisites:
•
See
ViQi on page 40
•
To perform the queries, you are required to log in to CommandCentral. See
CommandCentral (Subsequent
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps
Depending on your query, you can also say the following requests:
•
To play the available results, say "Play results".
•
To request for more details, say "More details".
•
To complete the Virtual Partner session, say "Complete".
7.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
7.2.1
Selective Call (ASTRO Conventional Only)
This feature allows you to receive a call from a specific individual with privacy.
7.2.1.1
Receiving a Selective Call
When and where to use: When you receive a Selective Call, you hear two alert tones and the LED
lights up solid yellow. The backlight of the screen turns green momentarily, the display briefly shows
CALL RCV, and the speaker unmutes.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
Examples
"Am I still at the <location>?"
NOTE: ViQi will ask for more information to complete the query.
"Where is <unit name>?"
"Tell me where <unit name> is."
NOTE: ViQi will ask for more information to complete the query.
for the queries supported by this feature.
Login).
step 1
Chapter 7 : Advanced Features
through
step 3
when responding to ViQi.
MN006727A01-AF
Logging In to
41
Advertisement
Table of Contents
