Table of Contents
Advertisement
Figure2-11 Attaching a cable management frame to the front rack posts
Connecting the grounding cable to the chassis
As shown in Figure2-12, the switch provides one grounding point at the rear panel.
Figure2-12 Grounding point
1
(1) Grounding point
To connect the grounding cable to the chassis:
1.
Unpack the grounding cable and grounding screws.
2.
Use the two grounding screws to attach the two-hole grounding lug of the grounding cable to
the grounding point (recommended torque: 20 kgf-cm), and then fasten the screws.
2-7
Advertisement
Table of Contents
