Table of Contents
Advertisement
Figure2-11 Attaching a cable management frame to the front rack posts
Connecting the grounding cable to the chassis
Use M5 grounding screws to attach a grounding cable that has a two-hole grounding lug or
single-hole grounding lug to the grounding point on the switch. If the grounding cable length or
terminal type cannot meet your requirement, make an applicable grounding cable or contact H3C
Support.
As shown in Figure2-12, the switch provides one grounding point at the rear panel.
Figure2-12 Grounding point
1
(1) Grounding point
To connect the grounding cable to the chassis:
1.
Unpack the grounding cable and grounding screws.
2-12
Advertisement
Table of Contents
