Adding A New Directory Entry; Editing A Directory Entry - Mitel 6392 Quick Start Manual

6392 Analog Phone Quick Start Guide

Adding a new Directory entry

1. Press the
2. Press the AddNew softkey.
An "Enter Number>" prompt displays on screen.
3. Enter the desired number using the dialpad.
Note: Press the Backspace softkey to delete the last digit entered. Press the Pause softkey
to add a pause to the number. Press the
Clear softkey to remove all the characters entered.
4. Press the Save softkey.
A "Press 1st letter to enter name>" prompt displays on screen.
5. Enter the desired name using the dialpad.
Note: Press the Backspace softkey to delete the last character entered or press the
NextSpace softkey to add a space after the last character entered. You can also press the
ChangeCase softkey to toggle the input characters to be upper or lower case. Press the Clear
softkey to remove all the characters entered.
6. Press the Save softkey.
An "Enter ring tone>" prompt displays on screen.
7. Press the Change softkey or the 5 and 2 (up and down) navigation keys to cycle through, select,
and listen to a sample of the ring tone.You can choose from a a total of 10 different ring tones.
Note: This custom ring tone is applicable to the specific Directory entry and will be played
when an call is incoming from the number associated with the Directory entry. As this custom
ring tone feature is dependent on Caller ID information and Caller ID information usually arrives
between the first and second ring, the default ring tone will be played up until the Caller ID
information is received.
8. Press the Save softkey.
The entry is saved to the Directory

Editing a Directory entry

1. Press the
2. Press the 5 and 2 (up and down) navigation keys to scroll through the list of entries or press a
dialpad key to see listings that start with that letter. For example, press 5 on the dialpad to see
entries that start with the letter "J" or press 5 twice to see entries that start with the letter "K".
3. Press the Change softkey.
An "Enter Number>" prompt displays on screen.
4. Edit the number as desired using the dialpad.
Note: Press the Backspace softkey to delete the last digit entered. Press the Pause softkey
to add a pause to the number. Press the
Clear softkey to remove all the characters entered.
14
key to access the Directory.
key to access the Directory.
key to add a flash to the number. Press the
key to add a flash to the number. Press the