Advertisement
2. Hard Disk Installation
The hard disk is installed as shown in Figure 2-1.
(1) Unscrew the cover to open the cover.
(2) Connect one end of the hard disk data cable and power cable to the moth-
erboard, and connect the other end to the hard disk.
(3) Turn over the chassis, mount the hard disk in the indicated position and
screw it tightly.
(4) Now turn over the chassis again and cover it with screws.
1. Before installation, make sure the power is disconnected.
2. Use the NVR dedicated hard drive for monitoring recom-
mended by the device manufacturer.
4
(1)
Figure 2-1: Hard Disk Installation
(2)
Advertisement
