Planar PT2285PW User Manual page 10

5. Take the optional cable cover and screw from the accessory box. Position all cables
under the cover lip as seen in the step 5 diagram.
6. Using a Philips Head screwdriver, insert the screw (CPMSP M3x10) into the cable cover
and monitor as seen in the step 6 diagram.
7. Re-attach the stand back cover to the LCD stand by pressing fi rmly until the tabs snap
into place as seen in the step 7 diagram. You may also keep the cables in order by using
the cable organizer.
Step 5
Step 6
Step 7
7