Section 6
6.5 CUTTER DECK ADJUSTMENTS
The mower is designed to bag or mulch the grass clippings.If additional
information or service is needed, contact your Scag Power Equipment
Dealer.
MULCHING THE CLIPPINGS
To convert from bagging grass and prepare the mower to mulch the
grass clippings:
1.
Lift the rear cover and remove the grass collection bag from the
mower. See Figure 6-7.
Figure 6-7. Mulch Conversion
2.
Insert the rear discharge plug into the cutter deck. See Figure
6-7.
1
2
2
25
BAG THE CLIPPINGS
To convert and prepare the mower back to bagging the grass clippings:
1.
Lift the rear cover and remove the rear discharge plug from the
cutter deck. See Figure 6-8.
2.
Reinstall the grass collection bag onto the mower. See Figure
6-8.
Figure 6-8. Bagging Grass.
R
2
1
1