System Transient Disturbance Requirements; Electrostatic Discharge Requirements; Electromagnetic Energy Susceptibility Requirements; Labeling - Planar LC08 Product Specification

High-bright monitor

Hide thumbs Also See for LC08:

Table of Contents

8.4

System Transient Disturbance Requirements

The Display shall meet the following system transient disturbance requirements:

8.4.1

The Display will perform normally when subjected to static electricity discharges from persons touching

the external surfaces of the Display. Performance is verified by testing according to EN 50082−1 (Ref IEC

801−2:1984) at severity level 3 (4 Kv contact discharge, 8 Kv air discharge). Tests are conducted with

service doors open. Testing is performed on points that are typically the first internal contact while

performing routing servicing and replenishment operations.

8.4.2

The Display will perform normally in an electromagnetic field with a strength of 10-volts per meter from

10 KHz to 1 GHz. (REF CISPR 22).

8.5

IEC 417 − Graphical Symbols for Use on Equipment.

8.6

ISO 3864 − Safety Colors and Safety Signs.

Title: Product Specification – LC08 High-Bright Monitor

Document Number: 023-0283-00

Page 22 of 26

Rev C

Table of Contents