Video Signal Input Requirement; Video Input Lines; Figure 4. Video Signal Connector - Pin Number Assignments; Figure 5. Video Signal Connector Illustration - Planar LC08 Product Specification

Section 4 - Video Signal Input Requirements
4.1

Video Input Lines

The Video Signal Connector will consist of fifteen (15) positions wired numerically and supplied
attached to the Display as a chassis mounted connector per definitions listed in 3. The "No Pin"
positions of this connector may not be used for any purpose.
Title: Product Specification – LC08 High-Bright Monitor
Document Number: 023-0283-00
Page 10 of 26
Rev C