Installing The Display Driver - Planar Dome E2 Reference Manual

Installing the Display Driver

Before you install the driver, remove any previously installed display driver for
the controller from your system.
To install the driver
1 Start your computer system. Log on with administrator privileges.
2 Click Cancel on the Found New Hardware Wizard. Click No at the restart prompt.
3 Insert the driver installation CD and click Next. Auto-detection reports the
driver version and controller board(s). Click Next.
4 Click the check box to enable independent mode for each controller.
Click Next.
5 Click Next to continue. File copy begins.
6 Click Continue Anyway on the dialog reporting no digital signature.
Repeat for a second controller.
7 Click Next upon completion of the driver installation.
8 Select the Restart computer option and click Finish.
To confi gure the display
1 Right-click the desktop and select Properties > Settings.
2 Use the native resolution of the display.
3 For use of the second display, select Extend my Windows desktop onto
this monitor.
4 Click OK until you return to the desktop.
7