Installing The Display Controller - Planar Dome C3i Quick Reference Manual

Installing the Display Controller

Turn your computer off . Leave the power
cord plugged into the grounded outlet.
To install the controller
1 Turn off all peripherals. Disconnect all
cables from the back of your computer.
2 Remove the computer cover.
3 Remove the blank bracket from the
available PCI slot.
4 Insert the display controller into the PCI slot,
align the connector pins, and press the board
down until it is fi rmly seated.
5 Secure the mounting bracket.
6 Reattach the computer cover and the
the peripherals.
When installing multiple DX2 display
controllers, install all boards before you
install the driver.
Remove blank
bracket
Open PCI slot
Installed board
5