Installing The Display Controller - Planar Dome C2 Quick Reference Manual

3

Installing the Display Controller

Turn your computer off. Leave the power cord
plugged into the grounded outlet.
To install the controller
1 Turn off all peripherals. Disconnect all cables from
the back of your computer.
2 Remove the computer cover.
3 Remove the blank bracket from the
available PCI slot.
4 Insert the display controller into the PCI slot,
align the connector pins, and press the
board down until it is firmly seated.
5 Secure the mounting bracket.
6 Reattach the computer cover and the peripherals.
When installing multiple display controllers,
install all boards before you install the driver.
Open 64-bit
Remove blank
PCI slot
bracket
Display controller
installed
5