Enabling And Disabling In-Call User Alert; Quick Call Ii; Initiating Quick Call Ii Transmissions - Motorola APX E5 User Manual

enabled channel, the Voice Mute button-press or the Voice Mute menu-selection allows the radio-user
to toggle on and off Voice Mute functionality.
6.10.1

Enabling and Disabling In-Call User Alert

This feature allows you to mute the voice transmission of the current zone and channel.
Prerequisites:Make sure you are in Home mode where the default zone and mode are being
displayed.
Procedure:
1 or to scroll to the VMut and press the Menu Select button directly below VMut.
Voice transmission is muted.
2 To turn off the feature, press the Menu Select button directly below VMut or the VMut
preprogrammed button again.
Pressing the Menu Select button directly below VMut or the VMut programmed button
momentarily toggles between Voice mute on and Voice mute off. Voice mute on shown
on the display indicates that the radio is muted to all conventional dispatch calls and affiliated
trunking group calls.
6.11

Quick Call II

This feature allows you to broadcast a series of distinct, recognizable tones before a voice
transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this pre-programmed Quick Call II tone
transmission to be sent to an individual talkgroup or over the entire system. Each tone is distinctive to
indicate different situation or different broadcaster.
NOTE: The receiving radio must be configured with the matching Quick Call II tone from the
transmitting radio, in order for the receiving radio to sound the selected tone followed by the
pre-configured alert tone.
6.11.1

Initiating Quick Call II Transmissions

Prerequisites:Tone must be preprogrammed into the Tone Signaling List on the broadcasting or
transmitting radio.
Procedure:
1 or to QCII, and press the Menu Select button directly below QCII.
2 or to select the tone to broadcast.
3 Press the PTT to broadcast the selected tone, or press and hold the PTT to broadcast the
selected tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You can begin your call after the tone ends.
4 Release PTT to listen.
MN006147A01-AE
Chapter 6: Advanced Features
63