Query
Target Location
6.1.1
Using ViQi Virtual Partner
Prerequisites:See
ViQi on page 42
are required to log in to CommandCentral. See
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps
Depending on your query, you can also say the following requests:
•
To play the available results, say "Play results".
•
To request for more details, say "More details".
•
To complete the Virtual Partner session, say "Complete".
6.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
6.2.1
Calling a Phone Not in the List
Procedure:
1
or to Phon.
2 Press the Menu Select button directly below Phon.
3 Enter the desired phone number on the keypad.
The display updates as the numbers are entered.
4 Press the
button or the PTT button on the keypad microphone to make the call.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press
or Menu Select button directly below Phon to exit.
Examples
"Can I get my exact location?"
"Am I still at the <Location>?"
NOTE: ViQi will ask for more information to complete the query.
"Where is <Unit Name>?
"Tell me where <Unit Name> is.
NOTE: ViQi will ask for more information to complete the query.
for the queries supported by this feature. To perform queries you
Logging In to CommandCentral (Subsequent
step 1
Chapter 6: Advanced Features
through
step 3
when responding to ViQi.
MN006147A01-AE
Login).
43