Parameter
Editing Keys
Use keypad to enter hexadecimal numbers:
•
Plus, multiple press 2 to scroll through A, B, C, 2.
•
Plus, multiple press 3 to scroll through D, E, F, 3.
Rx Type
Perform one of the following:
•
or
•
Press the keypad digits for quick access to locations in
Tx Type
the list.
Bandwidth
Protect
Tx Deviation
Power Level
Hot Keypad
Busy LED
Low Batt
LED
MPL Enable
Scan List
Zone Name
Use keypad to enter numbers and alphabet characters. For more informa-
tion, see
Top Chan
Name
Top Zone
Name
Chan Name
NOTE:
To edit Tx PL, Rx PL, Tx DPL, and Rx DPL, the PL Setting must be set to Disabled.
If PL setting is set to ALL, Rx or Tx, there is no Edit selection available to change the
codes for Tx PL, Rx PL, Tx DPL, or Rx DPL.
If PL setting is set to Rx, you can only edit Tx PL and Tx DPL codes.
If PL setting is set to Tx, you can only edit Rx PL and Rx DPL codes.
to toggle between valid entries.
Keypad on page
21.
MN006147A01-AE
Chapter 6: Advanced Features
Value
ANALOG/
DIGITAL/
MIXED
ANALOG/
DIGITAL
25kHz/
20kHz/
12.5kHz
ON/OFF
5.0 kHz/4.0
kHz/2.5 kHz
High/Low
ON/OFF
ON/OFF
ON/OFF
Disabled/Rx
/Tx/All
None/Scan
List 1, 2,
3,...
131