Direct To
FEATURE LIMITATIONS
•
Not all flight plan entries are selectable using Direct To (e.g., holds, course reversals)
Direct To Basics
Direct To is useful for
quickly navigating to:
•
New waypoints
•
An existing waypoint in the
active flight plan
•
Nearby airports
•
Map waypoints
•
An off-route course
•
User-defined holds
Direct To Search Tabs
Search tabs include: Waypoint, FPL, and NRST APT
190-02488-01 Rev. B
Tapping this key opens the Direct To function. Search tabs
provide three different methods of waypoint selection.
Set a course to any waypoint using
Direct To.
Selecting an identifier automatically
displays information about the
waypoint.
Direct To Window
Pilot's Guide
When navigating to a single
waypoint (e.g., a nearby airport),
the Direct To function provides a
quicker alternative to using the
active flight plan.
Navigation
3-43