Table of Contents
Advertisement
GLOVE QUALIFICATION STEPS
Complete only the tasks for the capabilities relevant to the installed navigator.
1.
Sitting in the pilot's seat, start the unit in normal mode.
2.
Perform the tasks listed in each checklist, tapping the specified keys with a
non-gloved finger. It is not necessary to record any results for this step.
3.
Repeat step 3 using a gloved hand.
4.
For each task, determine whether the touchscreen response is the same or
worse than without the glove.
5.
Record the results in the applicable column. Items that may cause the
operation to be worse include, but are not limited to:
•
Multiple attempts to select a key
•
Unintentional selection of adjacent key(s)
•
Excessive force on the touchscreen to select a key
6.
If all applicable tasks produce the same response with and without a glove,
you may use the glove in flight.
GLOVE QUALIFICATION PROCEDURE
Pilot:
Glove Description:
Circle the applicable navigator.
GPS 175
GNC 355
190-02488-01 Rev. B
GNC 355A
GNX 375
Pilot's Guide
Qualification
7-3
Hide quick links:
Advertisement
Table of Contents
