EVGA X299 FTW-K User Manual page 60

EVGA X299 FTW - K (142-SX-E297)
In the case of a drive
failure, the array
controller will notify you.
When you replace a
failed drive in the
RAID10, rebuilding the
array is mostly seamless.
For example, look at the
array on the second row
to the right. P-Drive1
failed, but P-Drive2 is
still working and uses the
same data. The array
will pull data from P-
Drive2 during the
rebuild, so the array can
be used normally while
P-Drive2 copies ALL of
its data back to the drive
replacing P-Drive1. The
rebuild process will only
rebuild 1TB worth of
data because only one
node failed. There will
be a performance hit
during the rebuild
process, which can be
further delayed if VERY
data intensive
applications are used, but
overall performance of
the array will still be
more than fast enough
to run effectively during
the rebuild. RAID10
rebuilds much more
quickly than its
predecessor RAID0+1.
RAID 10 (6 Drive)
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A L-Drive = DATA-B
L-Drive = DATA-ABC
L-DRIVE = ≃ 3TB
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
P-DRIVE4 P-DRIVE5 P-DRIVE6
P-DATA-B P-DATA-C P-DATA-C
L-Drive = DATA-C
- 60 -