EVGA X299 FTW-K User Manual page 109

EVGA X299 FTW - K (142-SX-E297)
In the image above, speakers become transparent in the image when they are unchecked;
this is to give you a visual reference of which speakers are enabled and disabled when
testing for sound.
The last section under
"Speakers" is "Room
Correction." This section
allows you to virtually
position the speakers using
the software to ensure that
the surround effects are
positioned correctly based
on physical distance.
This is *ONLY* supported
in 5.1 and 7.1 and you will
receive the message to the
right if you open the "Room Correction" tab in Quadraphonic or Stereo mode. If 5.1
or 7.1 is installed and setup in the "Speaker Configuration" page, you will see the full
Room Correction menu without an error message. All speakers will initially show semi-
transparently. To edit this menu, check the box for "Enable Room Correction" at the
bottom-center.
- 109 -