Pro-Form COACHLINK E9.0 User Manual page 10

5. Tip: Avoid pinching the Upper Wire (110).
Have a second person hold the Upright (4) on
the Frame (1).
Tip: Two M10 x 25mm Screws (92) are
preattached to the Frame (1).
Attach the Upright (4) to the Frame (1) with two
additional M10 x 25mm Screws (92); do not
fully tighten the Screws yet.
6. Locate the wire tie (A) in the lower end of the
Upright (4). See the inset drawing. Tie the wire
tie to the Upper Wire (110) as shown in the inset
drawing. Then, pull the upper end of the wire
tie until the Upper Wire is routed through the
Upright.
Tip: To prevent the Upper Wire (110) from
falling into the Upright (4), secure the Upper
Wire with the wire tie (A).
5
110
6
A
A
110
10
Avoid pinching the
Upper Wire (110)
92
4
92
1
A
110
4