Pausing Cd Playback; Advanced Multi-Cd Player Operation; Repeating Play; Playing Tracks In A Random Order - Pioneer AVIC-D2 Operation Manual

Pausing CD playback

Pause lets you temporarily stop disc playback.
1
Touch "PAUSE".
Play of the current track pauses.
Advanced multi-CD player oper-
ation
(1)
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 71

Repeating play

There are three repeat play ranges for the multi-
CD player: M-CD (multi-CD player repeat),
TRACK (one-track repeat) and DISC (disc
repeat).
1
Touch "REPEAT" in the FUNCTION
menu.
Each touch of "REPEAT" changes the set-
tings as follows:
• M-CD — Repeat all discs in the multi-CD
player
• TRACK — Repeat just the current track
• DISC — Repeat the current disc
❒ If you select other discs during repeat play,
the repeat play range changes to M-CD.
❒ If you perform track search or fast forward/
rewind during TRACK, the repeat play
range changes to DISC.

Playing tracks in a random order

Random play lets you play back tracks in a ran-
dom order within the repeat range, M-CD or
DISC.
1
Select the repeat range.
➲ Repeating play ➞ Page 80
80
2
Touch "RANDOM" in the FUNCTION
menu.
Touching "RANDOM" switches between
"ON" and "OFF".
Tracks will play in a random order within the
previously selected M-CD or DISC ranges.

Scanning CDs and tracks

When the repeat play range is set to DISC, the
beginning of each track on the selected disc
plays for about 10 seconds. When the repeat play
range is set to M-CD, the beginning of the first
track of each disc is played for about 10 seconds.
1
Select the repeat range.
➲ Repeating play ➞ Page 80
2
Touch "SCAN" in the FUNCTION menu.
Touching "SCAN" switches between "ON"
and "OFF".
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
3
When you find the desired track (or disc)
touch "SCAN" to turn scan play off.
❒ After track or disc scanning is finished,
normal playback of the tracks will begin
again.
Using compression and bass
emphasis
You can use these functions only with a multi-CD
player that supports them.
Using COMP (compression) and DBE (dynamic
bass emphasis) functions lets you adjust the
sound playback quality of the multi-CD player.
Each of the functions has a two-step adjustment.
The COMP function balances the output of louder
and softer sounds at higher volumes. DBE boosts
bass levels to give playback a fuller sound. Listen
to each of the effects as you select through them
and use the one that best enhances the playback
of the track or CD that you are listening to.
1
Touch "COMP" in the FUNCTION menu.
If the multi-CD player does not support
COMP/DBE, NO COMP is displayed and
you cannot select the function.