Rear View - Pioneer AVIC-D2 Operation Manual

Vehicle Dynamics Display
Indicates the status of your vehicle.
❒ You can change the items indicated on the left
and right meters.
❒ In the Vehicle Dynamics Display mode, the
speedometer display may show a different
speed than your vehicle's actual speedome-
ter, because your unit measures speed in a
different way.
➲ Setting the Vehicle Dynamics Display ➞
Page 60

Rear View

Rear view image is displayed on the left-hand
side of the screen, while the map of your sur-
roundings is indicated on the right.
(2)
(15)
❒ If the "CAMERA" is set to "OFF", the rear
view image is not displayed. Please set it to
"ON".
➲ Camera setting ➞ Page 102
❒ When using a camera set to turn ON/OFF in
conjunction with the reverse signal, no cam-
era images will be displayed in rear view mode
while you are moving forward.
❒ If the camera is set always ON, it can display
images in rear view mode when the vehicle is
moving forward. In that case, you should ask
the camera maker or dealer whether the cam-
era's functions or longevity would be affected.
30
❒ Rear View can be displayed at all times (e.g.
Enlarged map of the intersection
When "Close-up of Junction" in the Settings
menu is "On", an enlarged map of the intersec-
tion appears.
❒ When set to Vehicle Dynamics, the system
(10) (8)
Display during freeway driving
In certain locations of the freeway, lane informa-
tion is available, indicating the recommended
(7)
lane to be in to easily maneuver the next guid-
ance.
(13)
(3) (6)
While driving on the freeway, freeway exit num-
bers and freeway signs may be displayed when in
the vicinity of interchanges and exits.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please beware that in this setting,
camera image is not resized to fit to screen,
and that a portion of what is seen by the cam-
era is not viewable.
(14)
cannot be changed to an enlarged intersec-
tion map.
(18)
(19)
(13)
(20)