Changing The Scale Of The Map; Moving The Map To The Location You Want To See - Pioneer AVIC-D2 Operation Manual

➲ Moving the map to the location you want to
see ➞ Page 32
(14) Distance to an intersection*
Displayed on the enlarged intersection map. The
green bar gets shorter as your vehicle
approaches an intersection.
(15) Next direction of travel*
When you approach an intersection, it appears
green. The screen displays the distance to the
next guidance point, and the next guidance point
after that.
(16) Area to Avoid
➲ About detour area ➞ Page 42
(17) Direction line*
The direction towards the location set in (4) is
indicated with a straight line.
(18) Lane information*
Lane information is displayed the first time there
is a voice guidance on your route. When the guid-
ance screen is displayed near an interchange or
exit, the lane information disappears.
(19) Freeway signs*
These show the road number and give directional
information.
(20) Freeway exit information*
Displays the freeway exit.
❒ Information with the mark (*) appears only
when the route is set.
❒ Depending on the conditions and settings,
some items may not be displayed.

Changing the scale of the map

Touching the "Zoom in/Zoom out" key displayed
on the upper right of the screen displays the
scale gauge and "Direct scale" key. Directly
touching the "Direct scale" key changes the map
to the selected scale. Touching
the scale gauge allows you to specify the scale in
greater detail within a range of 25 yards to 1 000
miles (25 meters to 2 000 kilometers).
32
❒ The icon of a registered location and the traf-
fic information icons are displayed when the
map scale is 10 miles (20 km) or lower.
❒ POI icons and the line for traffic congestion
and traffic flow are displayed when the map
scale is 0.75 mile (1 km) or lower.
❒ The Direct scale key may not appear depend-
ing on the map display mode.
Moving the map to the location
you want to see
If you touch the display briefly, the shortcut menu
appears.
Touching anywhere on the map for at least 2 sec-
onds changes the map to Scroll mode and the
map begins scrolling in the direction you
touched. The scrolling stops when you release
your finger from the screen. At this time, the
scroll cursor appears at the center of the screen.
Also a line connecting between the current loca-
tion and scroll cursor appears.
Pressing the MAP button returns you to the map
of your surroundings.
❒ Touch the area close to the center of the
screen to scroll slowly; touch near the sides of
the screen to scroll through quickly.
or above
(1) Scroll location
The position of scroll cursor shows the location
selected on the current map.
(3) (1) (2)
(4)
Direct scale key
(5)