Download Print this page

Keurig K-Cup K150 Owner's Manual page 13

Single cup brewing system

Advertisement

Available languages

Available languages

Programming Your Brew Size
All brew sizes are enabled in the default setting. If you want to disable any
brew size, just press on the appropriate icon(s). Please follow instructions
outlined below.
From the Menu Mode, press
1.
15
fig.
"SET BREW SIZE(S)".
The LCD will display all enabled brew sizes.
2.
To disable a brew size press the icon. The
3
OK
check mark will change to an "X" indicating
4 Oz.
that the brew size is disabled (fig. 15).
3
3
Once you have selected your desired brew
3.
6 Oz.
8 Oz.
size(s), press "OK". The brew size(s) are now
3
set.
NOTE: You can not delete all brew sizes.
10 Oz.
12 Oz.
To enable a brew size you have already
disabled, just press its icon and then press
"OK". The 8 oz. setting is the default brew size
if all sizes have been disabled.
Programming on/off Features
The brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule.
16
fig.
ON/OFF Time
ON 12:00 AM
H
M
OFF 12:00 PM
H
M
OK
a. After setting the correct time (see "Setting The Clock" page 12), return to
the Menu Mode and press "ON/OFF TIME".
b. To set the ON time, press "DISABLED". The display will change to a time of
day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time.
c. To set the OFF time, press "DISABLED". The display will change to a time
of day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time (fig. 16).
13
The brewer can be
1. Leave it ON all the time.
left on all the time so that it is always ready
to brew a fresh cup of gourmet coffee, tea or
hot cocoa. To turn the brewer off at any time,
simply press and release the Power Switch.
Press and release the Power Switch again
to restore power to the brewer. You will have
to wait for the water to heat up before the
brewer is ready to brew.
Program the brewer for a specific On/Off
2.
Time.
NOTE: To use this programming feature,
the clock must be set to the correct time.

Advertisement

loading