K-Cup® pod holder. holes. Gently move it around to loosen any coffee grounds. Lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup® pod. TIP: Refer to support.Keurig.com for video instructions on cleaning the entrance/exit needles.
Water Filter, remove and set aside. NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added.
God. that you register your brewer on keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its OTHER LIMITATIONS option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase.
Page 6
J. K-Cup® Pod Assembly Housing K. Drip Tray Plate L. Drip Tray M. Drip Tray Base For replacement parts, please visit www.Keurig.com Coffeehouse taste in your own home. FIND YOUR PERFECT POD With over 70 brands and hundreds of varieties, find your match at keurig.com/new...