Storage; Transport; Care And Maintenance - Kärcher HDS 1000 DE Manual

Hide thumbs Also See for HDS 1000 DE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
Activate trigger gun until device is pres-
sure-less.
Secure the hand spray gun using the
safety catch so that it doesn t open ac-
cidentally.
Remove the water inlet hose from the
appliance.

Storage

CAUTION
Risk of personal injury or damage! Consider
the weight of the appliance when storing it.

Transport

ATTENTION
Protect the trigger from damage during
transport.
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Care and maintenance

You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
DANGER
Risk of injury if the machine is left running
in an unattended state. Remove the spark
plug or disconnect the battery before work-
ing on the appliance.
Risk of burns! Do not touch hot silencers,
cylinders or radiator ribs.
Maintenance intervals
Daily
Check the high pressure hose for dam-
ages (risk of bursting). Please arrange
for the immediate exchange of a dam-
aged high-pressure hose.
Weekly
Check oil level of the high pressure pump.
ATTENTION
Risk of damage! In case of lacteous oil in-
form Kärcher customer service immediate-
ly.
28
Monthly
Clean the sieve in the water connection.
Clean sieve in the water shortage safe
guard.
Clean filter at the detergent suck hose.
Every 500 operating hours, at least
annually
Decalcify appliance.
Have the maintenance of the device
performed by the customer service.
Maintenance Works
High-pressure pump
Oil change:
Ready a catch bin for appr. 1 Liter oil.
Turn out the oil drain screw.
Drain the oil in a collection basin.
Dispose of old oil ecologically or turn it in at
a collection point.
Screw in the oil drain screw.
Slowly fill in new oil until the "MAX"
marking on the oil container.
Note: Air pockets must be able to leak out.
For oil type refer to technical specifica-
tions.
Motor
Carry out maintenance tasks to the engine
according to the specifications provided in
the operating instructions of the engine
manufacturer.
Decalcify appliance
The flow resistance is higher if there are de-
posits in the pipes this increases the load
on the motor.
DANGER
Risk of explosion due to combustible gas-
es! Smoking strictly prohibited during de-
calcification. Ensure proper ventilation.
DANGER
Risk of burns injury on account of acid!
Wear protective glasses and protective
gloves.
Procedure:
According to statutory re uirements, only
tested and approved boiler decrusting
agents may be used.
EN
– 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hds 1000 be

Table of Contents