Omron FZ2-30 10 Series Instruction Manual page 6

Basic Configuration
* Items indicated with an asterisk are dedicated items, and cannot be substituted.
Use the monitor to check images and display the condition-setting
menus. The Controller performs the image processing specified by
the user settings and outputs the measurement results.
LCD integrated type FZD-500-10/FZD-505-10
Touch pen (standard accessory)
*
Camera cable
Camera cable
FZ-VS (2 m, 5 m, 10 m)
Elastic camera cable
FZ-VSB (2 m, 5 m, 10 m)
Right angle camera cable
FZ-VSL (2 m, 5 m, 10 m)
5
Controller FZD
*
Controller
Front view
*
Camera
Detects workpieces as images.
3D vision camera FZD-STC2M
Standalone camera FZ-SC2M/FZ-S2M
FZ-SC/FZ-S
The Controlle r
processing specified by the user settings
and outputs the measurement results.
Box type FZD-550-10
Right-side view
Use the monitor to check images
and display the condition-settin g
menus.
*
Power Supply
Recommended Model
By OMRON Corporation
S8VS-18024
Peripheral Device
* USB memory
FZ-MEM256
Input Device
Mouse, track ball
(Commercially available USB devices)
*
Controller
perform s the image
FZD-555-10
*
LCD monitor
FZ-M08 (8.4-inch)
Monitor cable
FZ-VM (2 m, 5 m)