Related Manuals for Fluke LinkRunner Pro LRPRO-1000
Summary of Contents for Fluke LinkRunner Pro LRPRO-1000
- Page 1 (217) 352-9330 | Click HERE Find the Fluke LRPRO-1000 Link Runner Pro at our website:...
-
Page 2: What's In The Box
Quick Reference Guide Welcome Thank you for purchasing Fluke Networks LinkRunner Pro! This test tool enables you to quickly verify Ethernet cables and network connectivity and availability. In addition, the instrument provides multiple tools for identifying the network device to which it is connected, identifies PoE ports, provides a Report generating function, and can serve as a reflector (optional feature) for your Fluke Networks MetroScope™... -
Page 3: Safety Information
Cleaning To prevent moisture from entering the LinkRunner Pro, clean it with a moist cloth only. Do not use organic solvents, acid, or alkali solutions. Safety Information The following symbols are used on the product and in this document: NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS PLEASE READ MANUAL FOR SAFETY CANADIAN STANDARDS ASSOCIATION CERTIFIED TO CANADIAN AND US STANDARDS WWarnings... - Page 4 External Features - Connections, Buttons, and the LED RJ-45 LAN port RJ-45 MAP port (cable testing) Power Button Power off – press and hold Backlight – press once briefly USB port Selection buttons - Up/Down arrows navigate the selections and adjust values - Left/Right arrows show additional information and choices - Select center button to edit a selection or toggle a value Link indicator LED...
- Page 5 Packet Reflector Screen (optional feature) – Enables packet reflector mode, which allows the instrument to be used as a remote device for the Fluke Networks MetroScope™ Service Provider’s network performance tests. Use the Configuration screen to set up the parameters.
- Page 6 Scroll up thru the functions Scroll right within a function Scroll down thru the functions Scroll left within a function Select a function Is this an active Ethernet port? Cable/Link Status: Straight patch Crossover patch Unknown patch (Auto-MDIX port on hub or switch) Link Level (displays when low) Advertised speed/duplex Actual link speed/duplex...
- Page 7 Home – Link Information and Wire Map functions The Home screen displays link or wire map information depending on the connection. If the RJ-45 Ethernet cable is connected from the RJ-45 LAN port to your network, LinkRunner Pro will display link information which will include link, speed/duplex, cable length to the network connection, and network utilization.
- Page 8 Additional Home Screen Messages LinkRunner Pro LinkRunner Pro is is discovering discovering/authenticating 802.1X Detected 802.1X, but failed to Detected 802.1X, but LinkRunner Pro is authenticate not configured for 802.1X Un-powered Device Token Ring Indicates that the wire map calibration is in progress. When the calibration is Telco completed, the display will show the home screen.
- Page 9 The PING function contains several screens that are accessed by scrolling to the right. The first PING screen displays a Tx/Rx summary of the Router, DHCP, and DNS PING results plus any IP addresses setup in the Configuration screen. As you scroll to the right, the PING provides details on the Router, DHCP, DNS and up to 10 additional IP addresses are displayed as shown below.
- Page 10 IntelliTone This function can be paired up with the Fluke Networks IntelliTone Probe. It allows you to use LinkRunner Pro as the tone generation device along with the IntelliTone Probe to trace connections using either a digital tone (Fluke Networks IntelliTone ), or two different analog tones.
- Page 11 Configuration The Configuration screen accesses multiple functions: It will display LinkRunner Pro version information, MAC address, along with the serial number. It allows you to enable 802.1X security; change the cable length measurements from feet to meters, set the power off timeout, use DHCP or manually enter the LinkRunner Pro IP address, enter up to 10 IP addresses to PING, and enable options.
- Page 12 PING IP address entry Allows you to enter up to 10 PING IP addresses. When you enter the PING screen, each address will get pinged. You may also use the LinkRunner Connect PC application to enter the IP addresses, then using the supplied USB cable, transfer the IP addresses to LinkRunner Pro.
- Page 13 Reports Edit/Erase Allows you to edit report names and erase reports. Each report contains a summary of the Home screen, PING screen, and LLDP, EDP, CDP screen. The reports must be viewed on the LinkRunner Connect PC application. Selecting the report name/number to edit: When is highlighted, press the selection button (center).
- Page 14 - any packet - destination MAC is this LinkRunner Pro and the data string contains a special Fluke Networks byte string (generated by the Fluke Networks instrument) - the data string contains a special Fluke Networks byte string...
-
Page 15: Other Features
LRPRO-LION Contacting Fluke Networks Sales, Service, and Support Centers To order accessories or get the location of the nearest Fluke Networks distributor or service center, visit the Fluke Networks contact website at www.flukenetworks.com/contact. Send email to support@flukenetworks.com. For operator assistance in the USA, call 1-800-28-FLUKE (1-800-283-5853). You can also visit the Fluke Networks Knowledge Base at http://kb.flukenetworks.com. -
Page 16: General Specifications
General Specifications Media Access 10BASE-T, 100BASE-TX, 1000BASE-T (IEEE 802.3), and PoE (IEEE 802.3af) Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through, Wireview cable ID Tone Generator IntelliTone digital tone: [500 KHz] Analog tones: [400Hz, 1KHz] UI Interface B&W, 2”x 1” display, Link LED UI Control / Data Entry Five push-buttons for selection of icons and navigation of menus Power Button... - Page 17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...