Battery
Description
3-cell, 41-WHr, 3.615-AHr, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the battery:
1.
Remove the six Phillips M2.0×3.0 screws (1) that secure the battery to the bottom cover.
2.
Lift the rear edge of the battery (2) to disconnect it from the system board.
3.
Remove the battery (3).
Reverse this procedure to install the battery.
Keyboard/top cover on page
Spare part number
844203-850
20).
Component replacement procedures
HP Confidential
29