HP ProBook x360 11 G2 Education Edition Manual page 52

HP Confidential
b. Remove the display bezel (4).
The display bezel is available using spare part number 917043-001.
The display bezel adhesive is included in the Miscellaneous Kit, spare part number 917062-001.
11. If it is necessary to replace the G-sensor module:
a. Remove the display bezel.
b. Release the ZIF connector (1) to which the G-sensor module cable is connected, and then
disconnect the G-sensor module cable from the G-sensor module.
46 Chapter 4 Removal and replacement procedures