HP Confidential
c.
Disconnect the LED board cable (2) from the LED board.
d.
Remove the LED board.
The LED board is available using spare part number 917050-001.
13.
If it is necessary to replace the display panel:
a.
Remove the display bezel.
b.
Remove the four Phillips PM2.0×2.3 screws (1) that secure the display panel to
the display back cover.
c.
Detach the piece of protective tape (2) that secures and protects the display panel cable.
CAUTION:
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
48
Chapter 4 Removal and replacement procedures
Before turning the display panel upside down, make sure the work surface is clear of